Machlovio · 454 Posts
seit 06.08.2013
Mos · 830 Posts
seit 21.12.2013
Mos 




__________________
„I don‘t like valves that look like golf tees. Intake valves should be the size of trash can lids, and pistons should be the size of manhole covers“ (Jay Leno)
HeikoJ · 4064 Posts
seit 18.11.2014
HeikoJ 




zum zitierten Beitrag Zitat von motorcycle boy
Das Gyrokonstrukt sieht irgendwie unplausibel aus:
- Das Schwungrad sollte viel näher am Maschinenschwerpunkt positioniert sein
- die gakelige Topcasehalterung soll allen Ernstes solche Kräfte bzw. Momente übertragen?
- das Schwungrad sollte „senkrecht„ positioniert sein, um analog zu den drehenden Rädern das Mopped aufrecht zu stabilisieren (Prinzip „drehendes Rad im Stand“)
__________________
'First shalt thou take out the Holy Pin. Then, shalt thou count to three. No more. No less. Three shalt be the number thou shalt count, and the number of the counting shall be three."
__________________
„I don‘t like valves that look like golf tees. Intake valves should be the size of trash can lids, and pistons should be the size of manhole covers“ (Jay Leno)
Dieser Beitrag wurde schon 6 mal editiert, zum letzten mal von motorcycle boy am 17.06.2020 16:05.
HeikoJ · 4064 Posts
seit 18.11.2014
HeikoJ 




zum zitierten Beitrag Zitat von motorcycle boy
Ich habe das für die anderen Interessierten ergänzt und bitte unseren HeikoJ, von überflüssigen Infragestellungen des Standardwerkes Abstand zu nehmen.
__________________
'First shalt thou take out the Holy Pin. Then, shalt thou count to three. No more. No less. Three shalt be the number thou shalt count, and the number of the counting shall be three."
Dieser Beitrag wurde schon 1 mal editiert, zum letzten mal von HeikoJ am 17.06.2020 18:16.



